Sample Coolers

They are designed to cool the steam sample to the required temperature condition so the collected fluid can be further analyzed in a safely manner.

SQ1-SC1  An all in one air cooled steam sample cooler

SQI-SC1

• An all in one air cooled steam sample cooler
• Clean hygienic 316L wetted pipe work.
• No external water supply needed
• Simple push button swap between steam flushing and sampling
• Tri-clover connection for inlet and outlet
• Full material certification
• Coil and spigots Electro polished.

SQ1-SC1  An all in one air cooled steam sample cooler

SQI-SC2

• Compact and portable steam condenser
• Easy hight adjustment to suit the sample bottle size
• Water cooled
• Supplied with water pump and cooling feed tubes
• High quality transportation case available
• Easily Steam Flushable

Steam quality testing as defined by EN285

– Non condensable test
– Dryness test
– Superheat test

Performing tests involve establishing the physical attributes of dry saturated steam, the gaseous phase of water https://en.wikipedia.org/wiki/Steam
It is the steam supplied to steam sterilizers.

Non-Condensable Gas

Non-condensable gases are the gases entrained in steam that do not condense back into water when the steam is cooled below its boiling point.Range limit is 0-3.5%

Dryness

Steam dryness fraction is a value used to quantify the amount of water within the steam. For example if steam contains 5% water by mass, it’s said to be 95% dry, or have a dryness fraction of 0.95. Range limit is 0.95 to 1.0

Superheat

The Superheat value is the temperature of the steam as it goes from steam line pressure to atmospheric pressure.Range limit less than 25 °C above the boiling point of water at your altitude.