Sample Coolers

what sample cooler are for ???

SQ1-SC1  An all in one air cooled steam sample cooler


• An all in one air cooled steam sample cooler
• Clean hygienic 316L wetted pipe work.
• No external water supply needed
• Simple push button swap between steam flushing and sampling
• Tri-clover connection for inlet and outlet
• Full material certification
• Coil and spigots Electro polished.

Steam quality testing as defined by EN285

– Non condensable test
– Dryness test
– Superheat test

Performing tests involve establishing the physical attributes of dry saturated steam, the gaseous phase of water
It is the steam supplied to steam sterilizers.

Non-Condensable Gas

Non-condensable gases are the gases entrained in steam that do not condense back into water when the steam is cooled below its boiling point.Range limit is 0-3.5%


Steam dryness fraction is a value used to quantify the amount of water within the steam. For example if steam contains 5% water by mass, it’s said to be 95% dry, or have a dryness fraction of 0.95. Range limit is 0.95 to 1.0


The Superheat value is the temperature of the steam as it goes from steam line pressure to atmospheric pressure.Range limit less than 25 °C above the boiling point of water at your altitude.